How to remove floor tile penetration stains

Ceramic tiles are the most important material for home decoration. Beautiful tiles not only make people feel clean and hygienic, but also add a bit of beauty to the room. Wear-resistant and easy-to-clean tiles are the most popular on the market, but over time, tiles will lose their original beautiful characteristics, and there will be a lot of dirt, which not only affects the appearance, but some stains are still difficult to clean. How to remove the stains that penetrate into the tiles?

1. How to remove the stains from ceramic tiles

That depends on whether it is polished tile or antique tile, this is very important! If it is polished tiles, you may just have to accept the reality. Because traditional polished tiles (floor tiles) need to be polished to make their surface shiny, there are pinholes on the surface of the polished tiles. If stains penetrate into them, they are basically impossible to wash off, and cleaning will only make the pattern fade. If it is antique bricks and wall tiles, you can clean them, but it is a bit troublesome.

a. Use multi-purpose cleaning cream

In daily life, ceramic tiles are very easy to be contaminated by various oil stains, water rust, etc., especially the joints are more likely to hide various dirt, and some dirt will penetrate. In order to keep the porcelain surface clean without damaging its gloss, you can use a multi-purpose cleaning paste for cleaning.

b. Anti-fouling of the surface of vitrified tiles is the key

The only drawback of vitrified tiles is that after polishing, the pores are exposed, making it easy for oil, dust, etc. to penetrate. According to industry insiders, this is a problem recognized by the industry, but some manufacturers have solved this problem through new technologies after research. Many brands of products have not been treated with anti-fouling treatment. Consumers do not understand the situation and do not pay attention when installing and using them, which will cause stains. Consumers should ask clearly when purchasing. Vitrified tiles that have not been treated with anti-fouling treatment need to be waxed during use, and ordinary floor wax will be sufficient. Before paving, in order to avoid damage to the brick surface during construction, cover the brick surface with woven bags or other items that are not easy to discolor.

2. Methods for removing common stains on tiles

a. For daily cleaning of tiles, you can use common laundry detergent or dishwashing detergent for simple cleaning. Cleaning tiles with a mixture of soap, a little ammonia and turpentine can make the tiles more shiny.

b. If polished tiles are used, they should be waxed regularly. The most appropriate time interval is 2-3 months. If there are scratches on the brick surface, you can apply toothpaste on the scratches and wipe them with a dry cloth to repair them.

c. For the gaps between tiles, you can use a cleaning paste to remove dirt from time to time, and then brush a layer of waterproofing agent in the gaps to prevent mold growth.

d. To remove pollutants such as tea, coffee, beer, ice cream, grease, etc., sodium hydroxide or potassium bicarbonate solution can be used; to remove pollutants such as ink and cement, diluted solutions such as hydrochloric acid and nitric acid can be used.

e. Special cleaning agents can be used to remove paint, coatings and other contaminants. To remove rust, wash with 2% oxalic acid solution and then wipe clean with clean water. If it is old rust stains, you can soak the rusted area with a mixture of 10% oxalic acid, citric acid and water, and then wipe it again with concentrated salt water.

f. Banana oil can be used to remove various glues. Pure banana oil is a colorless, transparent, volatile liquid with a strong banana smell. It is slightly soluble in water and soluble in various organic solvents. It is mainly used as a solvent and diluent for spray paint. Mercury can be scrubbed clean with gasoline or with a decontamination paste.