How to use carbon deposit cleaning agent

Many mechanical products, if used for a long time, are prone to carbon deposits, and carbon deposits will affect their normal operation. Therefore, the use of carbon deposit detergent is the best solution. It is especially suitable for degreasing and cleaning of automotive parts. It can maintain the original brightness of metal materials. However, you should also pay attention to the correct usage of the product and precautions to avoid adverse effects.

1. Product performance and use

1. Suitable for degreasing and cleaning of automobile parts. After cleaning, they are as bright as new and maintain the original brightness of metal materials.

2. This product is a neutral cleaning agent that can quickly remove oil stains on metal surfaces.

3. This cleaning agent has a strong ability to remove engine carbon deposits. It can replace gasoline, kerosene and organic solvents and be used for automobile engine cleaning, saving petroleum resources, and there is no toxic harm to the human body caused by organic solvents.

4. The cleaning liquid prepared with this degreaser is uniform and transparent, without suspension, precipitation, and hard water resistance.

5. Small dosage, complete dissolution, long service life, no residue, easy to rinse, no corrosion to the substrate.

2. Product Usage

1. When using this product, you should read the product instructions in detail and use it under the guidance of professionals. Cleaning methods include ultrasonic, spray, hot soaking, manual wiping, etc.

2. When using, the concentration of the cleaning solution should be adjusted according to the severity of the oil stain. Generally, the original liquid is prepared into a cleaning solution with a concentration of 5%~8%. Increasing the concentration can improve the cleaning ability. The detergent concentration is relatively higher when cleaning by manual wiping.

3. The best effect is achieved when cleaning at a temperature of 55~80℃.

3. Notes

1. Adjust the concentration of the cleaning fluid according to the severity of the oil stain, and rinse the workpiece thoroughly after cleaning.

2. Remove the floating oil on the surface of the tank liquid in time to avoid secondary pollution.

3. 1%~3% of cleaning agent should be added regularly every day. If the cleaning ability cannot reach the original level after replenishment, it can be discarded and replaced with new liquid.

4. Do not allow this product to come into contact with eyes. If it splashes into eyes accidentally, lift the eyelids and rinse with running water or saline.

5. To prevent excessive degreasing of the skin, please wear chemical-resistant gloves during operation.