How to clean baby bottles

All things used by babies need to be carefully cleaned and disinfected before they can be used by babies. Because babies have relatively weak resistance, if you do not pay attention to hygiene, bacteria may invade the body and pose a hidden danger to the baby's health. The baby bottle is the most commonly used utensil for babies. The baby bottle needs to be cleaned and disinfected regularly. Here I will tell you how to clean the baby bottle. Parents can learn from it.

1. How to clean the bottle correctly

1. First, prepare the bottle brush, bottle clamp, large magnetic bowl, pacifier brush, straw brush, small stainless steel pot and bottle cleaning liquid. First, disassemble the bottle into its various parts.

2. Pick up the bottle and take apart the nipple and straw. Fill a large bowl with an appropriate amount of water and soak the disassembled parts of the bottle in the large bowl.

3. Next, clean the pacifier. Brush the pacifier with a pacifier brush. Clean the straw. Insert the straw brush into the straw and rotate the straw brush to clean the straw.

4. Use a bottle brush to carefully scrub the inside of the bottle. If there is a lot of milk stains in the bottle, use an appropriate amount of cleaning liquid, and then use a brush-type bottle brush to carefully clean it. It is not advisable to use a foam-type bottle brush at this time, otherwise the cleaning liquid will not be cleaned out.

5. Put the washed bottles, nipples and straws into a boiling pot and sterilize them for 3-5 minutes.

6. After disinfection, pick up the bottles, nipples, straws, etc. with bottle clips, turn them upside down on a clean table, and drain the water. After the water is drained, assemble the various parts of the bottle and place them on the table.

2. Precautions when cleaning baby bottles

1. Cleaning the bottle requires enough patience and carefulness to clean the bottle thoroughly.

2. After the glass bottle has just been scalded, it is not advisable to fill it with milk from the refrigerator immediately. You should wait until the bottle has cooled down before filling it with ice milk, otherwise the bottle will explode.

3. The depth of the water in the pot should be able to immerse all feeding utensils. If the utensils are not completely immersed or bubbles accumulate on the surface, the result will be the same as if they were not boiled for a sufficient period of time and the bacteria will not be killed completely and effectively.

4. Add the bottle parts in batches. To prevent deformation and bursting, the glass bottle should be heated together with cold water; after the water boils, put the pacifier, bottle cap, pacifier holder and other plastic products into the pot, cover the pot and cook for 2-3 minutes before turning off the heat. If it is a plastic bottle, you need to wait until the water boils before putting it in.

Babies are new lives full of hope. Because of the fragility of new lives, we should give them more care and love, and care about every detail of their lives, such as milk bottles. Milk bottles are containers they use every day. Ensuring their cleanliness can also be said to be a side way to maintain the health of babies. Mothers should remember to clean and disinfect the milk bottles regularly!