How to use a soymilk machine?

Soymilk makers have gradually become a common electrical appliance in many households. It is actually very convenient to use a soymilk maker to make soymilk. You just need to prepare the ingredients and put them into the soymilk maker. Generally, before making soy milk, the dry beans need to be soaked. It is best to soak them one day in advance so that you don’t have to wait so long. Then put them into the soy milk maker according to the proportion of ingredients.

How to use a soymilk maker

1. Measure the ingredients

Before using a soymilk maker to make soymilk, we need to soak the soybeans or other beans thoroughly, which makes it easier to make soymilk. Use a soymilk maker and a dry bean measuring cup to scoop out the dry beans according to the 2/3 scale line, wash them and soak them in clean water. The soaking time is 8-16 hours in spring and autumn, 6-10 hours in summer, and 10-16 hours in winter. If you want to speed up the soaking time, you can use warm water to shorten it to 2 to 3 hours.

2. Add ingredients

Add beans and rice to the cup body. Use the bean measuring cup to measure the rice according to the 2/3 scale. Wash the soaked beans and put them directly into the cup body.

3. Add clean water

After putting the ingredients in, you can add clean water. Usually there will be a water level line in the cup. Add water to between the upper and lower water lines.

4. Install the grain grinder

Take the grain grinder and install it in the direction of the installation arrow. The mouth of the grain grinder and the lower cover should fit tightly without any gap. After installation, pull it down by hand. If the grain grinder does not move, it means it is installed in place.

5. Make soy milk

Put the machine head into the cup body in the correct position, plug in the power cord, the power indicator light comes on, press the soy milk button, the corresponding indicator light comes on, and the full nutrition soy milk program starts. When the soy milk is ready, there will be a prompt light or a prompt sound, and the soy milk is ready.

6. After the machine has beaten the soybean milk several times and fully boiled it according to the set program , the electric heater and motor stop working, and the machine emits an audible and visual alarm to indicate that the soybean milk is ready. Unplug and you're ready to drink.

7. Cleaning of soybean milk machine

The soymilk maker should be cleaned promptly after use, otherwise it will be difficult to clean after it dries. Machine head: Please use water to gently rinse off the soy milk or other things adhering to the lower part of the machine head. Do not immerse the machine head in water, and do not use water to clean the upper part of the machine head to prevent water from entering the machine and causing a short circuit. Rafael net: Please use a cleaning brush or cleaning block to carefully clean the Rafael net. Be sure to rinse it thoroughly to avoid residual soy milk and odor. Electric heater: Please use a cleaning block to clean the electric heater, and clean off the soy milk film or other things adhering to the electric heater to avoid a burnt smell next time you use it. Cup body: Please clean the inside of the cup body with a cleaning block and rinse it with clean water. Storage: Please store this device in a dry and ventilated place.