What are the correct steps for applying a facial mask?

Many people have the habit of applying facial masks, such as applying a facial mask before going to bed at night. After applying the mask, the skin will be very tender, and it will be very comfortable to go to bed at this time. The skin will be much better when you wake up the next day. There are many facial masks on the market, each of which has different functions, and the problems on each person’s face are also different. Some people have obvious wrinkles, some have spots, some have acne marks on their faces, some have dry skin, etc., so you must buy a facial mask that suits your skin. In addition, you can also make your own facial mask to use. This is not only cheap, but also very effective. So what are the correct steps to apply a facial mask?

First, the premise of applying a facial mask

When girls choose facial masks, they don’t know whether the mask is suitable for their skin type, which causes allergies on their face after applying the mask. Therefore, when applying a new mask, you need to do a sensitivity test to see if you are allergic to the mask. The method of sensitivity test is as follows:

1. Apply a small amount of essence in the mask on your wrist;

2. During the testing period, the mask needs to be placed in the refrigerator and sealed with plastic wrap.

3. After 30 minutes, if there is no redness or itching on the wrist, it means that the mask can be used on the face.

Second, the correct steps for applying a facial mask

The first step of the correct procedure of applying a facial mask is cleansing. The purpose of cleansing is to help the facial skin better absorb the essential nutrients in the mask. Only by removing the oil, keratin and dirt on the face can the facial skin really come into direct contact with the essence in the mask. It also prevents these dust from entering the pores along the essence of the mask and causing pores to be clogged, thus causing acne, blackheads and other skin problems. The correct cleaning method is as follows:

1. Wet your facial skin with warm water first;

2. Squeeze the cleanser into the palm of your hand, rub the palms of your hands together, and let the cleanser in the palm of your hand fully foam;

3. After the facial cleanser is fully foamed, apply it evenly to the facial skin, and then massage the face fully;

4. Rinse the facial cleanser off your face with warm water.

Third, the correct steps for applying a facial mask

The second step of applying a facial mask is to steam your face. Many girls feel that the mask is not absorbed well because the pores on the face are not fully opened, so the second step becomes very important. The specific method is as follows:

1. Add appropriate amount of water into the facial steamer, turn on the facial steamer, and steam your face towards the air outlet of the facial steamer. After 15 minutes, the pores on your face will be fully opened.

2. If you don’t have a facial steamer, you can also use a hot towel to apply to your face. Once the hot towel cools down on your face, use hot water to heat the towel and continue to apply it to your face. After 10 minutes, the pores on your face will be completely opened.

Fourth, the correct steps for applying a facial mask

Correct steps for applying a paste mask

When applying a paste mask, consider applying it to the drier areas of your face first. The drier the area, the longer you need to apply the mask. Therefore, you should start applying it from the T-zone and end with the U-zone of your face. The specific steps are as follows:

1. Neck, jaw, cheeks, nose, lips, forehead, from bottom to top;

2. It is not advisable to apply facial masks around the eyes, eyebrows, and upper and lower lips.

Correct steps for using sheet masks

To apply the mask on the face in a proper way, you need some tips to make the essence of the mask reach every part of the skin on your face. The specific method is as follows:

1. First, relax your facial expression to allow the mask to better fit every inch of your skin;

2. The nose is the highest part of the face, so get it right first, and then the rest of the face will fit in well;

3. After the nose mask is applied, start applying the mask from both sides of the nose. After the mask is applied along the nose, follow the contour of the face to both sides of the cheeks.

4. After the mask on both sides of the cheeks is well-fitted, the next step is to make the mask on the chin fit well;

5. The last step is to make the mask on the forehead fit well, then the mask on the whole face will become very fit.

Fifth, the correct steps for applying a facial mask Step 4

The time for applying a facial mask should generally be controlled within 15 to 20 minutes. After 20 minutes, the mask should be removed from the face immediately. If this period of time is exceeded, the mask will be reabsorbed by itself, causing the facial skin to become dry, the skin to tighten, and even wrinkles to appear.

Sixth, the correct steps for applying a facial mask

After taking off the mask from your face, it does not mean that the entire mask application process is complete. You need to complete the following steps to truly apply the mask:

1. Use warm water to clean the remaining mask essence on your face;

2. Rinse your facial skin with cold water to effectively shrink the pores on your face;

3. Apply basic moisturizing lotion to complete the skin care process.