How to clean the scale on the nozzle

What are the shower equipment in the bathroom? There are not only electric water heaters, but also water pipes and nozzles. We all know that scale will easily appear after heating water with electricity. Not only is there scale in the electric water heater, but also in the nozzle. The impact of scale on people is very large, and the damage to tools is also very large. If there is scale in the nozzle, it will not only affect the water output of the scale, but also cause people to have a lot of inconvenience when using it. Therefore, how to clean the nozzle scale becomes very important. Let’s talk about how to clean the scale in detail.

Find a larger bowl or cup, pour vinegar into it, soak the shower head with the water hole facing downwards in the vinegar, and after a few hours, rinse the shower head with clean water. It can be easily cleaned.

After long-term use, the water outlet of the shower head is easily clogged by scale, resulting in poor water flow.

method:

(1) Disassemble the nozzle and soak it in vinegar for about an hour and a half;

(2) Use a brush to gently brush away the rust and scale. Use and maintenance of the shower head.

Because the shower head has been running for a long time, due to the water quality. Due to environmental factors, a certain amount of scale and impurities will be produced inside the shower head. When scale and impurities accumulate to a certain extent, it may affect your bathing comfort and even damage the shower head, so pay attention to proper maintenance and care of the product.

1: Removal of scale: Every six months or less, remove the shower head and place it in a small basin, water the surface and interior of the shower head with edible white vinegar and soak it for 4-6 hours, then gently wipe the water outlet on the surface of the shower head with a cotton rag: After reinstalling the joint, let the water flow for a while, and wait for the white vinegar and scale to flow out with the water to eliminate or reduce the impact of scale on the shower head, and it can also have a certain bactericidal effect.

2: Maintenance of the electroplated surface of the faucet: Frequently wipe the electroplated surface of the shower head with a soft cloth dipped in a little flour, and then rinse with clean water to make the surface of the shower head bright as new.

Note:

1: Please pay attention to your own safety and the safety of the product when disassembling and assembling the shower head:

2: The filter gasket should not have a mesh that is too large or too fine. A mesh that is too large may not have a filtering effect, and a mesh that is too fine may affect the flow rate. The filter specification should be 40-60 mesh.

3: Do not use strong acid when removing scale to avoid corrosion to the shower surface.

4: Please do not disassemble the shower head for maintenance by yourself. Improper disassembly will cause damage to the product appearance and internal structure.

5: The ambient temperature of the shower head should not exceed 70C. High temperature and ultraviolet light will greatly accelerate the aging of the shower head and shorten its service life. Therefore, the shower head should be installed as far away from electrical heat sources such as bathroom heaters as possible. The shower head cannot be installed directly under the bathroom heater, and the distance should be more than 60CM.

What is the best way to clean the scale on the shower head? Looking at the tips we introduced above, I believe everyone has realized how convenient it is to clean scale. Now shower heads are very common in our lives, so how to clean the scale on the shower head has become something that many people want to know very much. Now, everyone can clean the scale easily.