Common faults of gas water heaters

Gas water heaters are mainly a kind of gas appliances that we often use in our daily life. They use gas as fuel, and then heat it to transfer heat to exchange some hot water. There are also many common faults and solutions for gas water heaters. We can continue to learn about the gas water heaters in our daily life. There is also a better way to learn. The main thing is to easily produce some water that is not hot enough or too hot, or the temperature of the water heater is unpredictable after it is ignited.

There are many faults in gas water heaters. Depending on the fault, you can perform simple self-repairs. If some other parts fail, you still need to find some after-sales workers to perform some other repairs. We can make some simple introductions to these simple minor faults in daily life by learning by ourselves.

Fault 1: The water is not hot

Reason 1: Low gas pressure: gas pipeline is blocked or gas pipeline pressure is low.

Solution: Check whether the gas pipeline is blocked (you can connect a pipe from the gas meter to the gas inlet of the water heater and connect it directly to the water heater. If the water heater works normally, it means that the pipeline from the meter to the water heater inlet is blocked). Please ask the gas company to check the gas pipeline pressure.

Reason 2: Excessive water flow: Pipeline pressure is too high or pipe diameter is too large.

Solution: Close the valve of the water inlet pipe and increase the set temperature of the water heater.

Reason 3: Improper setting. It should be set to high level or winter, but now it is set to medium level or spring and autumn level.

Solution: Set it up correctly according to the instructions in the manual.

Fault 2: The water is too hot

Reason 1: Low water pressure, small water flow, and clogged water pipes.

Solution:

a. Change the water pipe to a certain diameter;

b. Install a booster pump;

c. Clean the filter screen of the water inlet pipe of the water heater;

d. Adjust the water volume on the water heater to maximum;

e. Replace the shower head and make the shower head eye as large as possible.

Reason 2: Excessive gas pressure is mainly reflected in liquefied gas (LPG).

Solution: Replace the liquefied gas pressure reducing valve (must be Labor brand) and adjust the gas pressure to the required value.

Reason 3: Improper setting, mainly caused by setting the water heater in the high temperature area.

Solution: Set it up correctly according to the instructions in the manual.

The above are about the common faults and solutions of gas water heaters. In daily life, simple faults can be eliminated by yourself. If some other parts occur, you still need to find some after-sales workers to perform some other repairs. In daily life, you should also maintain and clean the gas water heater to ensure its life and better improvement.