Vacuum cupping jar

Cupping is a popular Chinese medicine treatment technique in life. It has helped many people achieve physical recovery in modern life. Moreover, this technique has become more and more popular with the development of modern medicine. Although cupping therapy looks traditional, it has a high scientific content. For example, vacuum cupping is the most commonly used method. Let’s take a look at how to do vacuum cupping.

Vacuum cupping: It is a fireless cupping tool that uses vacuum to create a vacuum negative pressure state, overcoming the shortcomings of traditional cupping. It consists of a vacuum gun, a tank and a connecting pipe.

The main features are that the cup body is transparent, and the negative pressure inside the cup can be adjusted at will according to the patient's physical condition and illness. It is easy to observe the changes in the skin inside the cup and to grasp the cupping time. It is safer to use and easy to operate, so it is suitable for hospitals and more widely used in families.

How to operate

1. Select the acupoints according to the condition of the disease. The acupoints marked in the acupoint selection diagram are located on the front and back midline of the human trunk, that is, the acupoints on the Ren and Du meridians are single acupoints. Other acupoints are arranged symmetrically. Only one side is indicated in the diagram, and acupoints on both sides should be used in treatment. When selecting acupoints, they can be divided into two groups according to the acupoints listed in the treatment reference, and one group can be used alternately every day.

2. Choose appropriate cupping equipment and a comfortable body position (sitting, supine, side-lying and prone).

3. Lift up the piston on the top of the selected tank to ensure ventilation.

4. Place the negative pressure gun muzzle

After gently putting on the piston on the top of the cup, quickly lift the rod vertically several times until the skin inside the cup bulges and the patient can tolerate it.

5. Connectors can be used in areas where cupping cannot be performed directly (such as the spine and waist). Connector installation method: first connect the big end of the connecting rod at one end of the connector to the big hole of the spare front mouth, and then connect the small end of the connecting rod at the other end to the negative pressure muzzle to make them one, then put the front mouth and the end of the cupping with the piston together, and then place the cupping on the part that needs treatment.

6. After the can is adsorbed on the body surface, gently rotate the negative pressure gun muzzle left and right and move it back and forth, and lightly press the can piston to prevent air leakage.

7. When the treatment is finished, just lift the piston.

8. After using the cupping device, wipe it with disinfectant and alcohol cotton. Do not soak, boil or process at high temperature.

9. If the cupping fails, please check whether the rubber plug inside the cup is tightly sealed, whether the connection between the negative pressure gun and the cup is too tight, whether the negative pressure gun and the cup are vertical, and whether the pressure on the skin is too great when the negative pressure gun and the cup are lifted.