How to remove urea from the toilet

Nowadays, more and more families use toilets, and few people use squat toilets at home anymore. Therefore, toilet is a more popular type of bathroom. Since urine and feces are often discharged into the toilet, a lot of bacteria will accumulate in it, so the toilet must be cleaned regularly. A lot of urine will appear in the toilet after a long time. Next, let’s learn how to clean urine.

1. White vinegar method

Because vinegar is acidic and the odor factor of the toilet is alkaline, when the two meet, a neutralization reaction will occur, thus achieving the effect of removing odor. Vinegar also has the effect of sterilization and decontamination! All we need to do is put white vinegar in a mineral water bottle, then poke a few small holes at the bottom of the bottle, and then place the bottle in the water tank normally. Every time you flush, some of the vinegar will flow out with the water and mix with the water to flush the toilet. This is the effect we want. Very clean. You can use toilet cleaner to brush around the toilet, which will not only clean the inside but also the outside. Not only can it prevent the inner wall of the toilet from turning yellow, it can also effectively deodorize, and the bottle will also take up a certain volume, so less water will be stored in the water tank, which saves water again. This really kills three birds with one stone!

2. Dilute hydrochloric acid method

1. Prepare tools

The tools are very simple, just a toilet brush that you usually use, and a liquid called dilute hydrochloric acid (which can be purchased at a hardware store).

Special reminder: Dilute hydrochloric acid is a corrosive liquid, so try not to let it come into contact with your skin.

Remember: it is dilute hydrochloric acid, not hydrochloric acid. It is already diluted. If you buy the wrong one, it will have the opposite effect and make the dirt more difficult to remove.

2. Observe the bottom of the toilet first

First, check whether there is yellow dirt on the flushing area at the bottom of the toilet. If you have used toilet cleaner and blue bubbles to clean it before but it didn’t work, you can skip this step and use dilute hydrochloric acid directly.

3. Pour in dilute hydrochloric acid

It is best to pour dilute hydrochloric acid directly before going to bed at night. Do not rinse with water and let it soak overnight. Dilute hydrochloric acid is colorless, so it cannot be seen.

Special reminder: For families with children, excess dilute hydrochloric acid must be destroyed to prevent children from playing with it. Do you know how powerful sulfuric acid is? Dilute hydrochloric acid is not much more effective.

4. Toilet flushing

You can flush the toilet early the next morning. You can see that all the dirt has been washed away. You can use a brush to scrub it several times. Families who like to use blue bubbles and toilet cleaner can add some when flushing together.

5. Toilet tank cleaning

Then clean the toilet tank. It is very simple to clean the toilet tank. Just put blue bubbles in the tank sink.

Special reminder: In order to extend the use time of Blue Bubbles, be sure to place Blue Bubbles away from the water inlet and outlet, and when putting the toilet cleaner in, you don’t need to tear open the outer packaging, just put it in directly.