The correct way to dye your hair with beer

Beer is a popular alcoholic beverage and the third most consumed drink. Drinking some beer in moderation can protect the cardiovascular system, reduce the risk of diabetes, and strengthen bones. In addition to drinking, beer can also be used in cooking. Beer duck is a very famous dish. Not only that, you can also use beer to dye your hair, and the effect is very obvious.

Step 1: Prepare the beer

Most beer is kept frozen in the refrigerator, so it should be prepared before use. While preparing, you can lower the temperature of the beer machine so it won’t be so cold. Using very cold beer to dye your hair is also very bad for your scalp, so be sure to prepare the beer before using it. It would be better if you pour it into a basin.

Step 2: Wash your hair

After preparing the beer, you should wash your hair first. Instead of using beer to dye your hair directly, the effect will be very poor. Because dirty hair contains a lot of oil, these oils will affect the effect.

Therefore, it is necessary to wash your hair before dyeing it. Many people will scratch their scalp vigorously during the washing process. It is not recommended to do this because beer hair dye is irritating. So when washing your hair, you should not grab your hair. Just massage your hair gently and then wash it clean.

Step 3: Use beer

After washing your hair, you can start the next step if you find that the temperature of the beer is relatively cold. You can just add some hot water, and you can either pour it down from top to bottom or just immerse your entire hair in beer.

Just make sure your hair is in contact with the beer so that the beer can moisturize every strand of hair. The whole process takes about five minutes. If you choose to soak it in beer, your neck will feel sore. Therefore, it would be more appropriate to use the pouring method. Massage every time you shower, and repeat this step until you are done.

Step 4: Apply conditioner

After using beer, don't rush to wash it off. You can apply a layer of conditioner on it. The effect will be better if you squeeze your hair first to remove any excess beer. Then apply conditioner to the ends of your hair and wait for a few minutes before washing it out. Conditioner is essential as it can make hair more shiny and smooth. While you wait, you can continue massaging your hair. Allow the conditioner to penetrate and do its job.

Step 5: Wrap your hair

After washing their hair, many people blow dry it first. In fact, this step is wrong, because when the hair is still wet, the friction between the hair is very large. If you blow it clean at this time, it will only damage your hair. Therefore, wrap your hair in a towel first. This is the correct approach. Just wrap your hair and don't rub it with a towel.

Step 6: Blow dry your hair

Once the towel has absorbed all the moisture from your hair, you can take it off. Start blow-drying your hair. It is recommended that you blow from top to bottom. The hair blown out in this way will not appear frizzy and will not damage the original structure of the hair.

Don't adjust the windshield of the hair dryer too high, otherwise it will easily hurt your scalp. Just use cold air or slightly hot air to dry it slowly. After blow-drying, you can find the effect of using beer to dye your hair. About twice a week is enough, but don't do it too frequently.