What is the method of making handmade soap at home

In recent years, DIY handmade soap has become popular. That is, you make soap at home, which you can use yourself or give to relatives and friends. Handmade soap can be used to wash hands and face, and can also be used as a shower gel. Its foam is very rich and can remove butter deep in the pores. It has the effect of maintaining the skin. The production method of handmade soap is also relatively simple.

raw material

1. Glass: used to stir raw materials. Due to the heat generated during the production process, it is best to choose heat-resistant glassware. Avoid using aluminum products.

2. Soup spoon: used to dissolve alkali. It can also be replaced by a stirrer. Aluminum products are also taboo.

3. Mixer: used to mix raw materials. It can be replaced by a large spoon and avoid aluminum products.

Mould: milk box, potato chips packaging, plastic box, etc.

4. 50ml water

5. 50ml red wine (any brand name product will do. The leftovers can also be used effectively.)

6. 250g cooking oil (Olive oil and other vegetable oils can be used. This is good for the skin.)

7. Alkali 30g (can be bought at pharmacies. Since it is a toxic substance, a letter of introduction from the company is required when purchasing. Be careful not to touch it directly with your hands.)

method

1. Dissolve the alkali with water. Put the water and alkali in a container and stir until the water becomes transparent. It should be noted that foaming and heat will occur during the stirring process.

2. Add oil while stirring. After the alkali is completely dissolved, add more oil gradually while stirring. Mix with a mixer for about 10 minutes.

3. Pour in red wine.

4. Continue stirring carefully for about 10 minutes until the red wine is thoroughly and evenly distributed. At this point, the liquid begins to gradually thicken.

5. Pour it into the mold, stop stirring, and after two or three minutes, inject it into the mold.

6. Leave it intact in a warm place for 1 to 2 days. At this time, the liquid produces a chemical reaction in the mold, please do not touch it with your hands.

7. Remove the soap from the mold. You can insert a knife or scissors into the mold to facilitate smooth removal.

8. Finally, cut into cubes of appropriate size and place in a ventilated place away from direct sunlight. After more than a month, the production is completed.