What are the methods for treating boiler scale?

As we all know, boilers are often found in many factories. They are mainly used to melt a lot of steel, including burning steel into red or making many things. However, boilers are relatively large and have strong internal pressure. We usually need to clean them well. If there is a blockage somewhere, it is no less than a heavy time bomb. What are the methods for treating boiler scale?

The scale in the large boiler acts as an insulating stone wall between the steel plates of the boiler wall and the water. The boiler steel plates were not exposed to water, and the fire in the furnace kept burning the steel plates red.

At this time, if cracks appear in the scale, water will immediately leak onto the high-temperature steel plate and evaporate rapidly, causing a sharp increase in pressure inside the boiler, and an explosion will occur.

The power of a boiler explosion is no less than that of a blockbuster bomb! It can be seen that the harm of scale should never be taken lightly! Therefore, in factories, an appropriate amount of sodium carbonate (commonly known as soda) is often added to the water to precipitate and remove the calcium and magnesium salts in the water, and the water becomes soft water.

Passing hard water through ion exchange resins can also remove minerals from it.

Now there is an economical and practical method to remove scale from boiled water. In the Taobao store: Taishan Tiangong, there is a patented product scale filter for ten yuan a set, which can easily remove scale, rust and other sediments and suspended matter in boiled water.

For us, the way we handle fruits in the boiler is very important. If we don't pay attention to the water temperature, once it increases, the boiler will easily rupture. Once it ruptures and the air enters and the pressure combines, it will cause an explosion, which will not only endanger personal safety, but also cause casualties.