Air conditioner remote control

In the hot summer, many families will buy one or two air conditioners and place them at home to relieve the heat and bring a certain degree of coolness. The most important device for an air conditioner is the remote control, because with a remote control you can adjust the air conditioner's temperature up and down from a distance, set different wind speeds, and set the swing direction of the air conditioner blades. So what should we pay attention to when using the air conditioner remote control?

In fact, many large and small household appliances are now equipped with a specific remote control. With this remote control, the use of electrical appliances is more convenient and quick. Different air conditioners have their own specific remote controls. In addition, as long as you understand the buttons and usage of the air conditioner remote control, you can easily control and remotely control the air conditioner in your home.

Air Conditioner Remote Control

An air conditioner remote controller is a device used to remotely control the air conditioner. It is mainly composed of an integrated circuit board and buttons for generating different messages.

Air conditioner remote control settings steps

(I) Manual setting steps:

1. Find the model code of the air conditioner you want to remotely control in the "Code Table" and turn on the power of the air conditioner. 2. Press the "Set" button continuously (intermittently) until the required code is displayed on the window and flashes; Note: This model code is the code corresponding to your air conditioner. 3. Press the confirm button, the model code will stop flashing and the setting is completed. Now this remote controller can control the air conditioner you selected. Find the code → Turn on the air conditioner → Press the "Set" key continuously to set → The model code flashes in the "Model" window → Press the Confirm key to confirm → The model code stops flashing → Setting is completed.

(II) Digital automatic search for applicable models:

1. Turn on the air conditioner. 2. Point the remote control toward the air conditioner receiver, press the "Set" button repeatedly until the air conditioner turns on/off automatically, and press the "Confirm" button; Note: This model code is the code corresponding to your air conditioner. 3. All settings are complete. Turn on the air conditioner → point the remote control at the air conditioner → press the "Set" button repeatedly. If the air conditioner turns on/off automatically, press the "Confirm" button. The automatic code search setting is completed.

Usage Notes

1. The remote control cannot add functions to your air conditioner. If your air conditioner does not have a wind direction function, the wind direction button on the remote control will be invalid. 2. The remote control is a low-consumption product. Under normal circumstances, the battery life is 6 months. If used improperly, the battery life will be shortened. When replacing batteries, replace two batteries at a time. Do not mix old and new batteries or batteries of different models. Pay attention to the positive and negative poles when installing the batteries. 3. Make sure your air conditioner receiver is normal, this remote control will be effective. 4. If battery leakage occurs, clean the battery compartment and replace it with a new battery. To prevent leakage, please remove the battery when the device is not in use for a long time.

Failure judgment

There are two ways to determine whether it is the remote control that has the problem: 1. Most mobile phones nowadays have a camera function. Turn on the camera function of your phone, then point the remote control at the phone and press a few times. Check again to see if you can see infrared light emitted by the remote control in the video just now. If so, there is basically no problem with the remote control. If not, there is a problem. 2. Find a radio that can receive the medium wave band (MW), bring the remote control close to the radio, and press the buttons on the remote control. If the radio beeps, it means the remote control is good. Otherwise, it proves that the remote control is broken.

Failure handling

When the remote control fails to work, people usually suspect that it is broken, but the actual situation is not necessarily the case. There are three possibilities: 1. The light emitting diode of the remote control is broken. Solution: Replace the remote control. 2. The receiver of the indoor unit of the air conditioner is broken. Solution: Replace the receiving head. 3. The circuit board of the air conditioner indoor unit is broken. Solution: Replace the resistor.

After reading the introduction of the air conditioner remote control, I believe everyone already knows how to use the air conditioner remote control. In fact, although the air conditioner remote control is a low-energy product, the battery life is generally short. Therefore, if you don’t need to use the remote control after a summer, it is best to remove the battery and then reinstall it when you need it. In addition, if the remote control fails, you should go to the brand store of the air conditioner to replace the remote control in time, otherwise you will not be able to control the air conditioner. Everyone should pay attention.