How to remove the plastic on a new door

Plastic products are becoming increasingly popular because they are cheaper and lighter. But sometimes when we buy plastic products, we don’t have them when we get home. How to remove plastic from new doors, when we use them we notice a big plastic smell. How to remove this plastic smell, don't worry, let us teach you a method. All you need to prepare is orange peel and clean water.

1. If it is a large area of ​​protective film, in order to avoid tearing the protective film badly, you can use an angle grinder equipped with a wire brush head to grind the door thoroughly. If you simply tear off the film, it is likely to make it ugly and damage the paint layer and cause rust on the door.

2. Use a hair dryer to heat . Turn the hair dryer to maximum, and then blow directly at the protective film for a while. The film will slowly soften on its own. At this time, we can use an ordinary eraser or a soft rag to effortlessly erase the offset print and tear off the protective film smoothly. If there is still residual glue on it, we can continue to blow it with a hair dryer, and then use the plastic film just torn off to stick the remaining glue off. Finally, wipe the door again with clean water to make it look cleaner overall.

For areas that are not cleaned thoroughly, you can soak them completely with medicated oil. After 15 minutes, we can use a soft rag to rub the area vigorously. If the dirt is still stubborn, you can extend the soaking time of the medicated oil and then rub it hard until it is clean.

3. White vinegar is also a good idea

Dip a dry dishcloth in white vinegar or edible vinegar, completely cover the hard-to-remove areas, soak it completely, soak it for 15-20 minutes, then use a rag to gradually wipe off along the edge of the film.

4. Lemon juice can remove stubborn spots

Rub lemon juice on the area where the sticker is stuck, and you can remove the sticker marks.

Drop an appropriate amount of medical alcohol on the surface of the area where the film is difficult to remove, and then soak it for a while. Just wipe it off with a soft cloth or paper towel. For example, expired perfume or lotion can also be used to replace alcohol, because these are rich in alcohol.

6. Remove with acetone

Pour an appropriate amount of acetone on the film, let it soak for 10 minutes, and then wipe it off with a rag. This method uses a small amount and is thorough. The best part is that it can remove the residual gum very quickly and easily, and it works better than alcohol.

A word of advice: After reading Xiao Qi’s recommendations above, I believe everyone has a general understanding of how to remove the film on the door. In addition to removing door and window films, the above methods can also be used to remove stickers on many items purchased from supermarkets, which are also difficult to remove. Don't tear it hard at this time, the above method also applies.