What are the methods for making handmade soap

Nowadays, everyone pays great attention to hygiene, because the skin in the body is very easy to come into contact with a large number of bacteria. If it is not cleaned well, it is easy to induce some diseases. Therefore, it is very important to clean the skin. However, many soaps on the market contain chemical substances, which can easily cause skin allergies. Therefore, everyone prefers handmade soaps. So what are the methods for making handmade soaps?

First, what are the methods for making handmade soap? Dissolve the alkali with water, put the water and alkali in a container, and stir until the water becomes transparent. It should be noted that foaming and heat will occur during the stirring process. Add oil while stirring. After the alkali is completely dissolved, add more oil gradually while stirring. Mix with a mixer for about 10 minutes. Pour in the red wine. Continue stirring carefully for about 10 minutes, until the red wine is thoroughly and evenly distributed. At this point, the liquid begins to gradually thicken. Pour it into the mold, stop stirring, and after two or three minutes, pour it into the mold. Leave it intact for 1 to 2 days in a warm place. At this time, the liquid produces a chemical reaction in the mold, please do not touch it with your hands. Remove from the mold. Remove the soap from the mold. You can insert a knife or scissors into the mold to facilitate smooth removal. Finally, cut it into cubes of appropriate size and place it in a ventilated place away from direct sunlight. After more than a month, the production is completed.

Second, please remember to wear a mask and gloves when making handmade soap. Sodium hydroxide is used in the process of making handmade soap, so please be careful about the safety of making handmade soap. In addition to being careful to prevent alkaline water from splashing during the handmade soap-making process, before making handmade soap, you must make sure that the environment at the handmade soap-making site is well ventilated; in addition, be careful not to let children or pets approach when making handmade soap.

What are the methods for making handmade soap? Although the steps for making handmade soap are simple, if the key steps for making handmade soap are ignored, the making of handmade soap may still fail. In the process of making handmade soap, especially when mixing alkaline water and cooking oil, you must stir them carefully and patiently. If the stirring time is not enough and the soap is too liquid, the handmade soap will not be easy to take shape. The temperature is high in summer, and the success rate of handmade soap making is relatively high; on the contrary, when making handmade soap in winter, the temperature drops quickly after the alkaline water and cooking oil are combined, and it is necessary to use water insulation heating to maintain the temperature in order to facilitate the production of handmade soap. If the handmade soap is too large, you can cut it into small pieces after it is completely saponified. The finished handmade soap should be stored in a ventilated place as much as possible, or placed on a soap dish with holes to keep it dry so that it will not be too wet and soft when used.