How to fill an oxygen bag?

When some serious diseases occur, the patient will have difficulty breathing on his own. At this time, oxygen bags are needed to quickly supply oxygen to the patient. Therefore, oxygen bags can often be seen in hospitals. In fact, oxygen bags are often needed in life. So if the oxygen in the oxygen bag is used up, how should you quickly refill it?

How to fill an oxygen bag?

I bought an oxygen bag, but for those who use it for the first time, they are unfamiliar with it and don’t know how to operate it, which is a problem. Well, the author provides you with some answers to the questions: "What is the method to flush the oxygen bag for the first time? How to inflate it?"

Fill it with oxygen directly for the first time. Because it is a new oxygen bag, there may be residual gas from production in it. So after filling it with oxygen for the first time, let the gas out and then fill it with air before using it directly. Generally speaking, hospitals use it directly without exhausting gas, so there is no need to worry. Now if you have an oxygen machine, you can turn it on when you want to breathe oxygen, so you don’t have to inflate it. Generally, an oxygen bag can only provide about an hour of oxygen.

How to inflate after use?

1. First, fill the oxygen bag with oxygen and make the inflation pressure at 25Kpa. 2. Connect the rubber catheter to the end of the oxygen tube with a plug, and insert the other end into the nostril. 3. The amount of oxygen absorbed can be adjusted with a plastic air stop valve. 4. When the pressure inside the bag is too low, you can press some heavy objects outside the bag to increase the pressure inside the bag.

Note: 1. The oxygen filling pressure should not exceed 25Kpa to prevent the oxygen bag from rupturing. 2. Avoid direct contact with acids, alkalis, oils and excessive squeezing. 3. Do not expose the device to strong sunlight during storage or non-use after filling with oxygen. 4. Do not use sharp objects to touch the oxygen bag to avoid scratching the oxygen bag.

Storage method: When the oxygen is not used after filling, please turn off the switch or tie the pipe tightly and put it in a cool place. Avoid placing it in the sun or at high temperatures and avoid contact with chemicals. Place in a dry and ventilated place, keep away from moisture.