How to cool down a tin house?

A tin house refers to a simple house or simple factory made of tin sheets. In the hot summer, the tin house will easily become stuffy and hot. This is because the air permeability of the tin sheet is relatively poor, and it is easy to feel stuffy in a high temperature environment, giving people a feeling of heat. There are many ways to cool down the tin house. You can open the windows for ventilation, and you can use fans to cool down at ordinary times.

How to cool down the tin house?

Add thermal insulation cotton to the roof of the iron factory building to reduce the heat from the sun outside the factory entering the roof. Two layers of thermal insulation cotton can be applied on the outside and inside of the roof at the same time, which will have a better effect.

Cover the roof of the iron factory building with a heat-insulating shade net to block direct sunlight on the roof and prevent more solar heat from entering the factory building and causing high temperatures.

A water sprinkler system is installed on the roof of the tin house. Water will be sprayed when the sun shines on the roof. The heat from the sun is absorbed through circulating water, which reduces the amount of direct heat from the sun entering the factory. This method requires a circulating water pool to avoid wasting a lot of water. This method also requires attention to the load-bearing capacity and water leakage of the roof.

Install ventilation balls on the roof to extract heat from the factory, reduce the speed and amount of heat from direct sunlight on the roof that flows into the factory, and increase the air circulation rate in the factory. This method has limited heat dissipation speed, and you must also pay attention to roof leaks.

Industrial exhaust fans are installed on the walls and windows of the iron factory building to force the high-temperature air accumulated in the factory building to be exhausted outside the factory building, forming air convection and smooth flow, thereby increasing the ventilation speed in the factory building and eliminating the accumulation of high temperature and stuffiness in the factory building.

In the iron house factory, cooling water curtains are installed on the windows opposite to the industrial exhaust fans, and used together with the industrial exhaust fans. The cold air entering the factory is cooled for the second time before entering the factory to lower the ambient air temperature. The disadvantage of this method is that the cooling water curtain has no cooling effect when used alone, and it must be used together with the industrial exhaust fans.

Install industrial air coolers on the windows of the outer wall of the iron factory building, lower the temperature of the outdoor cool air even lower, and then force it into the factory building to neutralize and cool down the high-temperature air inside the factory building. For this method, pay attention to the installation location of the industrial air cooler, try to place it in a cool and open place outside the factory building with fresh air.

Precautions

Pay attention to the quality of your own iron sheet factory and choose the appropriate method.

<<: How to cool down a stuffy room?

>>: How to cool down a room quickly?