How to remove tape marks?

In our daily life, it should be very common to use transparent tape, but we will find that there will be traces after using the transparent tape, and this trace is difficult to remove, especially when it is stuck on the wall or other places, it will also affect the appearance, so how to remove the tape traces? In fact, there are still many little tricks in our lives. Everyone should pay more attention, discover these little tricks, and use these little tricks to solve them.

How to remove adhesive tape from offset printing?

1. How to remove transparent glue marks:

1. Use an eraser to erase. Erasers are also very effective in removing traces of transparent adhesive, but they are only suitable for small areas of traces.

2. Wipe with a wet towel. You can soak the offset printed area with a wet towel and then wipe it slowly, but this method is only limited to areas that are not afraid of stickiness.

3. Wipe with alcohol. When using this method, you must first make sure that the area being wiped is not afraid of fading. Use a cloth dipped in alcohol to slowly wipe it until it is wiped off.

4. Wipe with detergent. Dip a towel in detergent and wipe slowly until it is gone.

5. Wipe with nail polish remover. Ordinary nail polish remover is also very effective in removing traces of transparent glue because it contains chemical ingredients.

2. How to remove double-sided tape

1. Don't tear off the paper first. Heat it with a hair dryer, and then you can take it off.

2. If black marks have been left, you can apply some white flower oil at home on it, wipe it off with a rag, and then wash it with clean water. If you don’t have white flower oil at home, you can use something like wind oil or trauma oil and apply it repeatedly.

3. If the black mark on the pasted area is not big, you can use an eraser to wipe it off. If the area is large, you can use anhydrous alcohol, that is, industrial alcohol, apply it to the pasted area, and then wipe it with a cloth.

4. Use a dry cloth soaked in vinegar to cover the entire trace area. After the double-sided tape is completely wet, you can gently scrape it off with a ruler.

3. How to remove the double-sided tape on the wall

1. First wipe it with nail polish remover. Because polish remover can cause the original color of the wall to fall off. This method is recommended to be used in small, inconspicuous places, and is not recommended for large, conspicuous walls.

2. Use heating to soften the double-sided tape. Blow it with a hair dryer and wait until the double-sided tape becomes soft. You can easily remove the marks.

3. We can take a piece of dry cloth soaked in vinegar to cover the entire area with double-sided tape marks. After the double-sided tape stains are completely wet, we can easily remove them with a ruler.

Warm reminder: Different methods should be used to remove traces of different tapes. Some methods are suitable for small-scale traces, and some are suitable for large-area tape traces. Choose the right method, and you will find that removing traces of tape is so simple.