Refrigerator temperature adjustment

Refrigerators are a common household appliance in today's society. Using a refrigerator can keep a lot of food fresh, especially for many office workers who don't have time to go shopping for groceries every day. They can put the vegetables in the refrigerator for a few days without any problem and they can still stay very fresh. Many people do not understand the issue of refrigerator temperature control. Many families answer that they have never adjusted the temperature since they bought the refrigerator. In fact, the temperature of the refrigerator should be adjusted according to the season.

There are many benefits of regulating the temperature of the refrigerator. It can save electricity and better store food. But I would like to remind everyone that the refrigerator is not a storage cabinet. Try not to store leftovers in it as they can easily be contaminated by bacteria. Eating such food for a long time is not good for your health. Here are some tips on how to adjust the temperature of your refrigerator:

1. Summer temperature regulation

During the use of refrigerators (freezers), their working time and power consumption are greatly affected by the ambient temperature, so we need to choose different gears in different seasons. When the ambient temperature is high in summer, it should be used in weak gear 2-3.

Reason: In summer, the ambient temperature is high, and it is very difficult to reduce the temperature inside the box by 1 degree. The loss of cold air through the box insulation layer and door seal will also be accelerated, resulting in a long startup time and a short shutdown time. This will cause the compressor to run for a long time at high temperature, aggravating the wear of the piston and cylinder. The insulation performance of the motor coil enameled wire will also be reduced due to high temperature, and the power consumption will also increase sharply, which is neither economical nor reasonable. If you change to a weak gear (2.3) at this time, you will find that the startup time is significantly shortened and the shutdown time is prolonged. This saves electricity, reduces compressor wear and extends its service life. Therefore, when the temperature is high in summer, adjust the thermostat to a low setting.

2. Winter temperature regulation

In winter, the gear should be set to 4 or above.

Reason: The product you purchased only has one refrigerator room thermostat to control the refrigeration and freezing temperatures. The technical requirement for refrigeration temperature is to be controlled between 0 and 10 degrees. Generally, the refrigeration environment is relatively low in winter, and it is easy for the refrigerator to reach the set temperature. If the set temperature is too high, it is easy for the refrigerator to be turned on for a short time, resulting in the failure to achieve the freezing and refrigeration effect. If the ambient temperature is low in winter, the main thing is to ensure the freezing and refrigeration effect. Generally speaking, if the ambient temperature is below 16 degrees, adjust it to level 5, and if it is below 10 degrees, adjust it to level 6 or 7. Sometimes, because the ambient temperature is too low, such as 0~5 degrees, you can lower the gear to refrigerate and freeze food. At this time, you can store the food outside the refrigerator.

The above introduces the specific operation methods of refrigerator temperature adjustment. We must keep up with the trend of science and technology and learn the necessary common sense, which is both energy-saving and reasonable. The refrigerator is actually not a very hygienic place. It must be cleaned regularly. Sometimes when you smell a bad odor in the refrigerator, it means there are a lot of bacteria. You should clean it thoroughly before and clean it during regular defrosting. This is responsible for yourself and your family's health.