What to do if honey spills on the ground

Many people have drunk honey. Honey tastes very sweet. As we all know when we are making honey, honey is a little sticky. Some people may accidentally spill honey on the ground when making honey. It is difficult to clean the honey if you just wash it simply. Therefore, you must pay attention to the method when handling honey. So what do you do if honey spills on the ground?

1. When honey is spilled on the ground, you can get some sand from the spot, pour some sand on the honey on the ground, and then sweep away the sand. If the amount of honey is large, pour more sand. If you can find sawdust, that would be the best; it is dry and absorbs honey easily. After sweeping away the sand, you can also wipe the floor with newspaper and finally mop the floor clean. If you can't find sand or wood chips, just use newspapers. Repeatedly use newspapers to clean the floor.

2. First use a thick towel to remove the honey mixed with broken glass on the ground, and then wipe the ground with a towel soaked in hot water. Pour boiling water on it and use absorbent cloth or paper to absorb the "honey water". Remember to wear rubber gloves to avoid scratching your hands. If the spill is not too much, you can wet the rag and wipe it off. If it is too much, you can sprinkle an appropriate amount of hot water, wait for it to dissolve, wipe it off with a cloth, or use a wet mop. (Dilute the floor cleaning and polishing agent with water at a ratio of 1:20, and mop the floor with a semi-wet mop.) If necessary, you can also use a floor scrubber with low-speed cleaning and cleaning agents: floor mop, dust remover, and floor cleaning and polishing agent.

3. Honey is soluble in water and can be removed by washing. The honey stains on the floor tiles can be wiped with a wet towel or mop. Mix 84 disinfectant and water in a ratio of 2:8 and apply it evenly on the surface of the tea stains. Cover it with toilet paper to keep it moist (soak the toilet paper as well). After 1 hour, uncover it and scrape off the liquid on the surface to see if there is any, wipe it clean with clean water. If there is still some, do it again as mentioned above.