Electric shaver not shaving cleanly enough?

Electric shavers are quite common items in our daily life. Generally speaking, most men have an electric shaver of their own. Some people are born with full beards. If they don’t clean their beards regularly, it will not only affect their personal image, but also make them look very old overall. However, if you use an electric shaver, sometimes you may not be able to shave cleanly. What is going on?

Electric shaver not shaving cleanly enough?

First open the electric shaver head and use a small brush to brush off the residue on it.

After brushing clean, take out the toothpaste we often use and squeeze the toothpaste into the blade of the cutter head.

Don't put too much toothpaste, as it will overflow and be difficult to clean up.

Then install the shaver, turn on the switch and let the shaver rotate for a while, about a minute.

Then remove the shaver head, rinse it with water, drain the water, and wipe it clean with a dry cloth.

Note: Never rinse the shaver body with water to prevent water from entering the battery and circuit. Wipe it clean with a dry cloth to avoid residual toothpaste from solidifying on it.

How to shave with an electric shaver

1. Because the face will expand slightly after washing, it is best to shave before washing. The ideal time to shave is in the morning after getting up and before washing your face.

2. When using a mesh shaver, please keep the shaver perpendicular to your face and hold the shaver at a 90-degree right angle;

3. Because the beard grows downward, shaving in the reverse direction can make the stubble stand upright and be easier to shave, so when shaving, shave from bottom to top in the reverse direction;

4. When shaving, hold the skin tight with your hands and do not push the blade hard. Just slide it lightly across the beard area to shave off the stubble.

How to use an electric shaver

Charge

1. Push the switch button down [you can see the "OFF" mark].

2. Use the sliding plate to push the charging head out of the shaver. Then plug it into the wall. The green indicator light will come on.

3. The shaver can be connected and charged at a voltage between 100V-240V.

4. The shaver will stop automatically after charging for 8 hours.

5. After the shaver is fully charged, it can work continuously for about 30 minutes.

6. After charging, use the sliding plate to move the charging head back into the shaver.

7. To ensure the longevity of the battery, please note: a. Charge and store the shaver at an ambient temperature between 5-35 degrees; b. Do not connect the shaver to the power supply for a long time.

Shaving

1. Make sure the shaver is fully charged.

2. Never let water or other liquids enter the shaver.

3. Shaving is best when the skin is dry. Therefore, it is best to use a razor before washing your face or after some time.

4. When using, place the razor head on the skin and move it quickly, making both circular and non-circular movements. Alternatively, use your free hand to hold the skin taut.

5. If there are more beards, they can be shaved shorter. The hair on the neck can also be shaved.

6. Please note: Your skin may take 2-4 weeks to fully adapt to this unique Philips shaver system.

7. Put the protective cap on after shaving.

Precautions for using electric shavers

1. Make sure the power switch is not turned on when cleaning.

2. Use a special razor brush for cleaning.

3. Clean the beard storage chamber once a week and the cutter head once every two months.

4. Clean the cutter head frequently, but be careful not to damage the blade when cleaning. You can clean the shaver heads with a degreasing liquid such as alcohol. After cleaning, please add a drop of special lubricating oil to lubricate the cutter head, which can ensure the comfort of shaving and ensure a longer service life of the cutter head.

5. To avoid confusion, separate the razor head (mesh cover and blade) each time you clean it, that is, each mesh cover and blade cannot be mixed up. This is very important because each set of mesh and blades are ground together. If you replace the guard and blades, it may take several weeks before the shaver reaches its optimal shaving performance.