How to clean floor heating scale

In winter, many families in the north have floor heating. Floor heating means that with the circulation of hot water in underground pipes, the house will feel warm and will not feel the cold in winter. However, we all know that floor heating is easy to be blocked, especially some substances filtered through water block the pipes of floor heating so that water cannot flow, so that we can't feel the heat. So what are the methods for cleaning floor heating scale?

Geothermal pipe cleaning requires the use of an air pump and a pulse machine. All the substances involved are air and water. The air and water are mixed and oscillated at high pressure to flush away all the scale, rust, microorganisms and their metabolites on the pipe wall. This is commonly known as the high-pressure pulse method, which is currently the more advanced and popular approach.

There are three main methods for cleaning geothermal pipes: one is friction with a steel ball and a sponge ball, which is generally called "shooting bullets". This is an earlier method and is a bit troublesome to operate. The biggest harm is that there are safety hazards and pipe blockage accidents have occurred.

The second method is to soak it in chemicals and then rinse it. This method can clean it thoroughly, but it will affect the service life of the pipe. The above two methods are rarely used now. Formal companies basically adopt the third method, namely the high-voltage pulse method, which is both clean and safe and reliable.

In fact, the floor heating needs to be cleaned every once in a while, because the water is not necessarily pure water. Some scale contained in the water can clog the mesh of the pipes, which can easily block the floor heating and make it impossible to feel the heat. Therefore, regular cleaning is the most important. In addition, you should also pay attention to sterilization and disinfection, and rub back and forth with a steel sponge ball.