Solar water heater cleaning

Solar water heaters are a common type of water heaters used in our homes. Cleaning of water heaters in daily life is also very important. Water heaters are energy-saving, environmentally friendly, safe, efficient and economical. They have many advantages. Most of the solar water heaters on the market in daily life are vacuum tube solar water heaters. With the passage of time and the influence of water quality and air environment, the system performance of solar water heaters will also decline a little.

It is also very important to maintain and preserve solar energy in daily life. Prolonging the life and using it normally and efficiently are also very important for solar water heaters. In daily life, it is mainly about some care and cleaning. Here we briefly introduce the simple cleaning of solar water heaters.

Solar water heater cleaning

1. According to local water quality, air and other related factors, regularly clean the scale inside the vacuum tube of the solar water heater and clean the dust on the outer wall of the vacuum tube to ensure the heat collection effect of the vacuum tube of the solar water heater.

2. According to local climate conditions, regularly check the stability of the solar water heater bracket and do a good job of anti-corrosion and anti-rust repair to ensure the safe and stable operation of the solar water heater.

3. During the inspection, if any leakage or damaged vacuum tube of the solar water heater is found, it should be replaced in time to ensure the heat collection efficiency.

4. When the seasons change, especially in winter, the antifreeze condition of the pipeline should be checked, and multiple layers of insulation can be used to prevent frostbite at the pipeline joints.

5. Drain the system regularly to prevent pipe blockage and clean the water tank to ensure clean water quality. When discharging sewage, just open the sewage valve while ensuring normal water inflow, and wait until clean water flows out of the sewage valve.

6. For all-weather hot water systems equipped with auxiliary heat sources, the auxiliary heat source devices and heat exchangers should be checked regularly to see if they are functioning properly. For auxiliary heat sources heated by electric heating tubes, make sure that the leakage protection device works reliably before use, otherwise it cannot be used.

The above is how to clean a solar water heater, ensure the correct use of solar energy, regularly check the stability of the solar water heater bracket, do a good job of anti-corrosion and anti-rust repair work, install an all-weather hot water system with an auxiliary heat source, and run everything safely and stably according to the climate conditions. In daily life, you should regularly check the water heater to see if there are any faults and keep it clean. .