Electric water faucet installation steps

In the cold winter, there must be enough hot water at home, but if you want hot water to flow out when you turn on the faucet, you may have to use an electric faucet. Electric faucets have advantages that water heaters and solar energy cannot match. Although they can also produce hot water, the water in the pipes is still cold, so you need to drain the water in the pipes before you can use hot water.

Electric water faucets allow you to have hot water just by turning on the tap. The so-called electric water faucet is what we usually call a fast heating faucet. It heats the water through instantaneous electric impulse, making the water flowing out of the faucet hot. As a relatively new product, how to install the electric water faucet?

Step 1: Remove the original ordinary faucet first

First, close the water pipe valve, remove the original non-electric water faucet, and clean the pipe interface with clean water to avoid excessive rust and blockage.

Step 2: Assemble the parts

1. First connect the electric water faucet elbow to the electric water faucet body and fix the machine.

2. If you want to use a wash basin, unscrew the nut on the water inlet of the main body and fix the electric faucet on the wash basin; if you do not need a wash basin, you can skip this step.

3. Then connect the electric water faucet to the water pipe.

Step 3: Check

1. After installing the electric water faucet, first turn on the water valve switch and check whether there is any water leakage at the connector.

2. Then turn on the electric water faucet, drain water into the machine, and turn the hot and cold water switches back and forth several times to debug.

3. After completely exhausting the air bubbles in the machine, plug in the power supply.

4. Adjust the hot water to the required position, because the temperature of the hot water is adjusted by the hot water size control switch. When the red light comes on, it means heating has started.

Hot water faucet installation precautions:

1. After the electric water faucet is installed, you should turn on the water first and then the power. Turn the handle up and down. After you see water flowing out of the outlet, turn on the power and it can be used. (First time use only).

2. The electric water faucet has both cold and hot water flows. When the hot water or power is cut off, there is no need to frequently unplug the power supply.

3. The electric water faucet is installed under pressure. When the switch is turned to the hot water direction, the heating will start automatically, and no electricity will be consumed when it is turned to the cold water direction. Easy to use, saves water and electricity.

The above are the specific installation steps of the electric water faucet. After the installation is successful, you can use hot water very conveniently. Generally, it only takes 3-5 seconds to turn on the faucet to let you use warm hot water. You no longer have to suffer from the cold. In addition, it is very small and convenient. It is an indispensable good helper in your home.