What are the tips for unclogging a clogged water pipe?

Now many rural areas have begun to implement drinking tap water, which has improved the safety of drinking water. However, many people only know how to use it and do not maintain the water pipes. Only regular maintenance can extend the service life of any item and reduce the occurrence of some faults. Due to various factors, it is easy to cause the tap water pipe to be blocked. So what are the tips for unblocking the tap water pipe?

First, what are the tips for unclogging a clogged water pipe? Drain uncloggers: Drain uncloggers are particularly useful for unclogging blockages caused by hair, grease, paper, etc. It is widely used to unclog sinks, washbasins, bathtubs, floor drains and toilets in restaurants, hotels and homes. It does not damage sewer pipes (including PVC pipes) and does not destroy the electroplating layer. How to use: Remove the accumulated water in the wash basin or sanitary ware, pour 50-100g of this product into the sewer pipe. If there is no water in the sewer, please add half a cup of clean water. At this moment, there was a jubilant atmosphere in the pipeline. After about 20 minutes, rinse with plenty of water. Recommended dosage: washbasin, bathtub, floor drain—100G, vegetable sink—200G, toilet—400G.

Second, the method of unclogging with a pump: When the kitchen sewer is blocked, you can insert the hose of the pump into the sewer, add a small amount of clean water, and continuously pump water in, and the pipe will be unblocked.

Third, the soda and vinegar unclogging method: first pour half a cup of baking soda into the sewer, then pour half a cup of vinegar. The soda reacts with the acid in the vinegar to remove the sticky stuff in the pipe.

Fourth, unclog the kitchen water pipes. Use a hand-cranked pipe cleaner to clear the blockage. The method of use is to first turn the lock screw counterclockwise, then pull out the spring and put it into the sewer pipe, until it hits the obstacle, then pull out about 10 cm of the spring, tighten the lock screw, install the handle, and apply pressure. When it is completely inserted, loosen the lock screw and pull out another 10 cm of the spring. Repeat this movement until you feel it is easy to turn the handle, which means it has passed through the blockage, then slowly pull it up, and the problem can be solved. This is usually the way to deal with clogged sink or toilet pipes.

What are some tips for unclogging a clogged water pipe? Use water pressure to unclog it: take a plastic tube (or rubber tube) with a diameter of 10 mm and a length of about 1 meter, put one end tightly on the faucet, and insert the other end into the clogged part of the pool. Wrap cloth around the outside of the rubber tube, plug the drain of the pool, turn on the faucet and turn it to the maximum. The water pressure is enough to flush away the blockage.