How to clean suede snow boots

Suede snow boots are comfortable to wear and breathable, and are popular with many people. However, it should be noted that this type of boots is not resistant to dirt and can easily be dirty due to dust from outside. However, they cannot be wiped off by force, and even if washed with water, there is no way to completely wash them off. In order to maintain them in daily life, you can use some relatively simple and effective methods.

First method:

Materials: brush, shoe tree, cleaner, renovation agent, sponge, sanitary ball.

step:

1. Remove dust. (You can use a vacuum cleaner) (Some girls recommend using an old bath towel, choose carefully).

2. Use a shoe stretcher to prop it up first. (The wooden shoe tree can change with the shape of the shoe)

3. Use a special brush. Note that the copper wire surface should mainly be used to treat areas with heavier stains and polished areas. First use the eraser side to brush in one direction, and use the side surface for the seams. Focus on rubbing the stain in circles, then rub it with copper wire.

4. Wipe with a damp sponge to wet the shoe surface. The purpose is to mainly deal with water-soluble substances.

5. Shake the cleaner well and spray it on the surface. Use a rubber brush to brush back and forth repeatedly to remove stains on both sides of the fiber, and absorb the dirty foam with a damp sponge.

6. Let it air dry for more than ten minutes. When the fur is slightly dry, use the rubber side to brush it in one direction while it is still damp to spread out and tidy up the fur.

7. Let the shoes air-dry for half an hour. After the uppers are dry, stuff newspapers inside the shoes for protection. Spray the renewal agent evenly at a distance of 15 cm from the shoes. Renewal agents contain brighteners, colloids (to enhance the adhesion of other substances), pigments, solvents (to dissolve mixed substances), etc. The purpose of spraying renewal agent is mainly to replenish color. Black shoes tend to turn white after being worn for a long time, so it is best to use a color renewing agent.

8. After drying, use a rubber brush to make the color uniform.

9. Finally, put the desiccant in the storage.

Second method:

Rubber brush and suede colorant.

Raw rubber brush: It has a raw rubber strip on the front and is specially used for cleaning leather surfaces to remove dust from the leather surface. There are copper wire strips on the side of the brush, which are specially used for the gaps on the side of the shoe and can remove the plaster that penetrates deep into the gaps on the side of the shoe. (Note: Copper wire strips should not be used on leather surfaces to avoid damaging the fur)