What is the reason for water accumulation in the refrigerator

Refrigerators are now home appliances that almost every household has. In winter, food and fruits are kept fresh in the refrigerator, and in summer, food is kept in the refrigerator to prevent it from rotting. The low temperature of the refrigerator can also be used to make and store ice cream. However, after using the refrigerator for a long time, there will be water in it, which will not only affect the refrigeration of the refrigerator, but also flow out of the refrigerator, making the house dirty and messy. So what is the reason for the water accumulation in the refrigerator? How should it be dealt with?

reason

First,

When food is placed in the refrigerator, the temperature is too high. Overheated food contains water vapor, which turns into water after cooling. When this water cannot be completely discharged, it forms water accumulation. To address this problem, simply do not put overheated food in the refrigerator.

second,

Opening the refrigerator door frequently causes a large amount of hot air to flow into the refrigerator, forming heat and cold convection. When the refrigerator door is closed, the hot air can easily liquefy into water. This phenomenon is familiar to everyone. It is the same as how water droplets easily appear on the windows of a closed room in winter. Everyone should try to reduce the number of times you open and close the refrigerator door, and shorten the time you open and close the refrigerator door. As long as you pay a little attention during use, it is not difficult to solve this problem.

third,

The drain hole is clogged. There is a drain hole on the back of the refrigerator to drain the water inside. When you find too much water, check whether the drainage holes are unobstructed. If the drain hole is found to be clogged, it should be cleared with a thin wire while cutting off the power supply.

method

1. Open the refrigerator door and absorb the water in the fresh-keeping area with a towel or other absorbent material.

2. There is a hole on the back wall of the refrigerator, which is blocked by a plastic buckle. See the picture below? Pull out the plastic buckle and use a 40 cm long iron or copper wire to slowly insert it into the hole on the back wall. After inserting it, turn the iron wire several times to fully remove the blockage.

3. At this time, use a plastic bottle to fill some water and test it. If water leaks out, it means it is unblocked. If it does not leak, it is time to proceed to the next step.

4. Didn’t I ask everyone to prepare a screwdriver? It’s useful now. Use a screwdriver to open the back cover of the refrigerator. Then you will see a hole on the back of the refrigerator where water flows downwards. Similarly, use a wire to slowly insert it into the hole from bottom to top, and then turn it a few times inside.

5. Now use water to test again. Similarly, pour water slowly into the hole from the front door of the refrigerator. Now a miracle should happen and the water will come out. Just screw on the back cover of the refrigerator. The whole step is completed.