What is the function of glass glue cleaning agent

Glass glue detergent is used to remove the glass glue on the glass, which can achieve very good results. But we all know how to clean glass glue. In fact, in addition to the use of these detergents, we can also solve it through some methods and techniques in life. Here we recommend several techniques for cleaning glass glue, which you can try in life.

1. How to wash glass glue

1. Since we are very busy during renovation, we may not realize that the objects are already stained with glass glue most of the time. Therefore, when we find out, the glass glue has already solidified. If the glass glue is attached to ceramics, glass, metal and other objects, we can directly scrape it off with a scraper when the amount is small. If the amount is large, we can use banana water or specific detergent to scrub it.

2. If the glass glue solidifies on your hands, you must stay calm. The treatment method is very simple. Generally speaking, the glass glue is not firmly attached to the hands. Therefore, we only need to rub our hands vigorously against each other a few times, and then wash them with clean water and there will be no problem.

3. Sometimes we may accidentally get glass glue on something and find out in time that the glass glue has not solidified. Therefore, we can directly wash it with water. Of course, this must ensure that the object stained with glass glue itself can be washed with water. This is the simplest way to clean glass glue, so we must pay special attention when operating and clean it immediately if it gets stuck.

4. If the glass glue is solidified on a relatively hard flat glass, just scrape it with a utility knife. However, if it is on wooden furniture, you cannot use a utility knife to scrape it off. Instead, use a brush. If the effect is poor, choose banana oil to wipe it, and the force should be appropriate. Never destroy the furniture.

2. How to use glass glue

1. Press the switch at the back of the glue gun with one hand and pull out the bolt with the other hand;

2. Use scissors to cut the glue outlet at the top of the glass glue; do not cut the threads when cutting;

3. Screw the glass glue nozzle onto the cut glue outlet;

4. Put the glass glue with the glue nozzle screwed in flatly into the glue gun;

5. Press the switch behind the glue gun, push the bolt forward, and fix the glass glue hose;

6. Aim the glue nozzle at the position where the glass glue needs to be applied;

7. Pull the trigger of the glue gun hard and inject the glue to the required position;

8. Finally, use a scraper to smooth the glass glue and make it even;

9. After applying the glass glue, it usually takes 1 hour for the surface to become glazed and 24 hours for it to dry completely. During this period, it is best to use other methods to fix related items and do not shake them.