How to clean the carpet

It always brings a lot of harm in life, and with the development of the current trend, more and more people will lay carpets at home, which greatly improves the home environment. However, carpets are not easy to clean and are relatively complicated. But as long as you have patience, everything can be cleaned, and cleaning carpets is the same. So, how to clean carpets? Let me introduce it to you below, I hope it can help you, let’s take a look.

Carpets include various carpets made of genuine leather, pure wool, and chemical fiber, tapestries, bed blankets, decorative blankets, etc. Carpet cleaning is done with a steam sauna machine, a multi-function cleaning machine, a vacuum cleaner, and then with special disinfection and decontamination agents to steam-kill carpet mites, sterilize, use foam to clean and decontaminate, use a vacuum cleaner to absorb dirty water, air dry, and comb. Finally, use an anti-fouling spray to form a waterproof film on the carpet surface to achieve a waterproof and dustproof effect.

How to clean the carpet at home Method 1: Water extraction cleaning (suitable for chemical fiber carpets)

1. How to clean the carpet at home? First, vacuum the carpet thoroughly with a vacuum cleaner, then dilute the detergent, or you can fill it into the water tank.

2. After the carpet has been in the water tank for 10-15 minutes, the stains will be separated from the fibers.

3. Use a floor scrubber to extract and wash, and move the machine backwards so that each operation row overlaps partially, and perform at least two extractions and washes.

4. While cleaning the carpet, use a water vacuum cleaner to clean the carpet that has been cleaned.

5. Let the carpet dry completely. To speed up the drying process, you can turn on the carpet dryer.

How to clean the carpet at home Method 2: Dry foam cleaning (suitable for pure wool carpet)

1. Similar to the previous steps of water extraction cleaning, use a vacuum cleaner to completely vacuum the carpet.

2. Then carry out local treatment and use special cleaner to treat the oil stains, fruit stains and coffee stains on the carpet separately.

3. Dilute the carpet foam cleaner and inject it into the foaming box.

4. Use a hand brush to handle the edges, corners, and places where the machine can reach.

5. Use a single-disc sweeper equipped with a bubbler and carpet brush to scrub the carpet with dry bubbles. Leave it on for a while and then repeat.

6. Use a carpet comb or rake to comb out the carpet cilia. This is very important for the appearance of the carpet, especially for cotton carpets with longer fibers, and it also helps speed up the drying of the carpet.

7. Use a vacuum cleaner to remove dirt and dry foam crystals and wait for the carpet to dry.

The above introduces how to wash carpets. I believe everyone has understood it. I also want to tell you that carpets are very popular now. They can improve the home environment and cleaning is also a very important aspect. Therefore, you must pay more attention and know the material of the carpet. Only by cleaning it accordingly can you reduce the harm to the carpet and make it easier to clean.