What is the correct way to apply a band-aid

Band-aids are very convenient and simple things that can quickly stop bleeding and prevent bacterial invasion. Of course, if the Band-aid is not applied properly, bacteria will enter through the gaps. We must adopt the correct method of applying the Band-aid. Moreover, many people's wounds are in places that are not easy to apply bandages, such as joints, so the simple Band-Aid structure cannot meet people's needs. In addition to these, there are still many things to pay attention to even in more common places. The following introduces the correct way to apply a Band-Aid.

(1) Clean and disinfect the wound first. This is a must before applying any plaster. If conditions permit, you can use medicine to disinfect the wound. If conditions do not permit or the wound is too large or too deep, you can first use cold boiled water to clean the visible dirt in the wound, then apply a band-aid to temporarily stop the bleeding, and then go to the hospital to further clean the wound to prevent it from festering.

(2) The ointment of a band-aid covers a small area, so it is only used in emergency situations for minor traumatic bleeding. If the wound is too large and the area not covered by the ointment is still prone to infection, you will need to go to the hospital for gauze bandage.

(3) Band-aids are sterile products that have been disinfected and cannot be used if the packaging is damaged. After unpacking, do not touch the sterile gauze with your hands to avoid indirect contamination of the wound.

(4) Band-aids should be replaced promptly and the wound should be kept dry and clean. Especially after the wound gets wet, the band-aid should be replaced immediately without any delay.

(5) If allergic reactions occur during use of the bandage, stop using it and consult a doctor.

Non-joint

1. Prepare the band-aid 2. Cut the band-aid along the middle line 3. First move the band-aid from the upper left to the lower right 4. Then move the band-aid from the upper right to the lower left 5. Then put the band-aid together parallel to each other

Joints

1. Prepare the band-aid 2. Cut the band-aid along the middle line 3. First move the upper left to the upper right 4. Then move the upper right to the upper left

The above introduces the correct way to apply a Band-Aid. Band-Aids are certainly very important things in people’s lives and can help people protect themselves quickly, but you must also pay attention to the manner and method. Otherwise, if the Band-Aid is not applied correctly, it will not only not help the wound recover, but will also cause the wound to become more and more serious. So everyone should pay attention and do it according to the correct method above.