How to wash fur

Wearing a fur coat will enhance one's temperament and give others a noble and warm feeling. Therefore, many friends now prefer fur. Indeed, fur is a symbol of a person's nobility. But fur is the easiest to get dirty, and it is not so easy to clean. So friends, do you know how to wash fur? How to wash fur without harming it?

Regarding fur cleaning, the cleaning methods are different due to different skin types and materials. There are three types of fur: mink, sheepskin, etc. Different fur materials require different cleaning methods. How to wash different types of fur? Let's take a look at the introduction of the article on this issue.

High-grade fur cleaning (mink fur).

Detergent powder: magnesium oxide powder, talcum powder ratio 1:1

Washing method: Spread the fur flat on the washboard, use a sponge to dip the powder and evenly apply it to the quilt, repeatedly apply it to the dirty parts, let it stand for 24 hours, use a brush to clean the powder, then put the fur on the portrait air model, use an air spray gun to blow off the powder, and use a dense-tooth comb to dredge the quilt in the forward direction.

Ordinary fur cleaning (sheepskin).

Washing solvent: 95% alcohol Usage: 200-250ml alcohol

Detergent powder: Talc powder Usage: Talc powder 500-1000 grams

Washing method: Put the fur on the portrait air model, use an air spray gun to evenly atomize the alcohol solvent onto the quilt, dip a sponge in the powder and repeatedly apply it to the quilt, rub it gently, use a brush to sweep the powder off the quilt, then use an air spray gun to blow the powder off, and use a sparse-tooth comb to dredge and sort the quilt in the forward direction.

White plush yellowing treatment.

Washing solution: hydrogen peroxide, water ratio 1:10

Washing method: Put the fur on the portrait air model, use an air spray gun to evenly atomize the solution onto the fur, fully wet it for 5 minutes, use a short-bristled brush dipped in the solution to gently scrub from top to bottom, finally rinse the fur with a clean water spray gun, place it in a ventilated and cool place to dry, and dredge the fur in the forward direction.

Light-colored plush with graying finish.

Washing solution: >90# gasoline, 25% ammonia water, ratio 1:1

Washing solution: Put the fur on the portrait air model, use an air spray gun to evenly atomize the solution onto the fur, fully wet it for 5 minutes, use a short-bristled brush dipped in the solution to gently scrub from top to bottom, and finally rinse the fur with a clean water spray gun, place it in a ventilated and cool place to dry, and dredge and sort the fur in the forward direction.

Light plush glossy matte finish.

Washing solution: white vinegar or glacial acetic acid, water, ratio 1:1 or 1:2

Washing method: Put the fur on the portrait air model, use an air spray gun to evenly atomize the solution onto the fur, atomize once every 5 minutes, repeat 3-5 times, until the fur is fully moistened and in the form of water mist, let it stand for 15 minutes, then use a dry sponge to wipe and clean it from top to bottom along the fur, and place in a ventilated and cool place to dry.

Fur aged.

Washing solution: alum, salt, softener, water, ratio 2:1:1:300, water temperature 40-50℃, common amount: 100 grams of alum, 50 grams of salt, 50 grams of softener, 1500 grams of soft water.

Washing method: Soak the fur in the solution for 15-20 minutes to allow it to fully penetrate the leather, rub it with moderate force, and brush the leather repeatedly with a brown brush, rinse it with clean water, and place it in a ventilated and cool place to dry.

The above article explains how to wash fur. Some of the chemicals described in the article are common in our daily lives. When washing fur, you must follow the steps introduced above, so that you can better clean the fur. Of course, we can also take the fur to a special cleaning shop for cleaning, which will be more helpful to the life of the fur.