How to clean scale in heating pipes

For many friends in the north, every household has heating, which is a very common thing. Although heating is good, heating is divided into heating pipes and radiators. Long-term water flow in radiators will cause some adverse heat reactions in heating. For example, the heating pipes after passing through the water flow hole will produce a lot of scale. Too much scale will clog the mesh and make the scoundrel unable to feel the temperature. So what are the short-term pipe scale cleaning methods?

After using the radiator for a long time, scale will inevitably appear inside the pipes. At this time, we need to master certain methods to cleverly clean the scale inside the radiator pipes. However, we would like to remind everyone here that removing scale from radiator pipes can also prevent internal corrosion.

Because the boiler is the temperature-raising part, as the temperature rises, the oxygen and calcium ions in the water are more likely to combine to form calcium carbonate which is difficult to remove and finally precipitates in the boiler.

Although radiators as terminals are not as prone to scaling as boilers, they will still scale over time and cause trouble to users. Currently, the more popular descaling methods include the addition method and the internal corrosion prevention method, which are also relatively simple and feasible methods for descaling.

The anti-scaling agent for radiators is a compound of alkaline substances and organic and inorganic substances. The alkaline substances in the anti-scaling agent cause the calcium and magnesium salts in the radiator pipe boiler water to form slag, which is removed by sewage treatment. This removes the calcium and magnesium ions and prevents them from forming hard scale.

Moreover, the organic matter in the radiator's anti-scaling agent will increase the fluidity of the water residue, making it easier to discharge. At the same time, this organic matter in the radiator's anti-scaling agent will also form a barrier layer on the metal surface to prevent scale from forming on the metal surface.

By adding anti-scaling agent to the running boiler water, it will protect the entire system, including the radiator. The biggest advantage of this method is that customers do not have to do it themselves, it can be done by the community or radiator heating company. Many heating systems currently use this method with good results.

Moreover, if there is too much scale in the pipes, it will be more troublesome to clean them, especially the filters in short-term pipes. If the blockage is too serious, we have to take them down and clean them. It is best to put them in the water pipes and rinse them with hot water. In addition, use a steel wool to rotate back and forth. It is best to clean the filter before installing it back, which can have a better effect on the indoor temperature.