What material is good for baby bottles

The milk bottle is mainly used to hold milk. It is mainly used to hold hot milk or some milk for babies to drink. The milk bottle is mainly not white, but as long as it refers to the manufacturer of baby milk bottles, it will give a pacifier. In daily life, there are many types of milk bottles, mainly stainless steel milk bottles, silicone milk bottles and glass milk bottles.

It is also the most critical in the selection of baby bottles in daily life. Glass and plastic baby bottles are mainly sold on the market, which are easy to clean and disinfect, but not easy to break after alternating solutions. The inner wall of the glass baby bottle is smooth, easy to tilt, and not easy to deform and break during steam sterilization.

There are three types of baby bottles on the market: ceramic bottles, glass bottles and plastic bottles. Ceramic bottles are easy to clean and sterilize, and are not easily broken by alternating hot and cold temperatures. The inner wall of glass bottles is smooth and easy to clean, and will not deform after steaming or sterilizing. They are suitable for babies who cannot hold a bottle to feed by themselves. Plastic bottles tend to turn yellow or opaque after a long time, making it difficult to check whether the bottles are clean. Some may even deform after being steamed and sterilized. However, they are relatively safe for babies who can hold the bottle and drink milk by themselves. There is a kind of rubber nipple attached to the bottle with an automatic air intake device. When the baby sucks the milk in the bottle, the air intake device opens due to the negative pressure in the bottle to keep the pressure difference inside and outside the bottle small, which is conducive to the baby sucking milk. It saves the trouble of repeatedly pulling out the nipple to allow air to enter through the nipple hole during feeding and avoids interference with the baby's feeding.

You should use bottles with caps to cover the sterilized nipples and bottle mouths to prevent contamination. If you use a bottle without a cap, you can make a bottle cap with white cloth. The cap should be larger than the diameter of the bottle so that it can cover the nipple and the top of the bottle. The mouth of the baby bottle should be larger rather than smaller to facilitate filling with milk and cleaning. It is best to buy a large bottle with a capacity of 260 ml, which can be used until weaning without having to be replaced. But it should be made clear that 260 ml is not the amount of milk a baby should drink at one time. The amount of milk a baby under 6 months old should not exceed 200 ml at one time, and the maximum amount of milk a baby over 6 months old should not exceed 220 ml at one time.

The number of bottles should be equal to the number of times the baby is fed milk and water every day or more, so that the bottle will not be delayed in use if it is broken. Some parents only buy 2 or 3 bottles to use alternately. They only wash them or rinse them with boiling water after feeding, and use them again without steaming and sterilizing them. Such carelessly cleaned bottles can easily breed bacteria and cause intestinal infections in babies. There are enough bottles and nipples to make it easy to collect used bottles and nipples for centralized cleaning and disinfection. Sterilized bottles should be capped for use the next day. Don't lose the big picture by trying to save bottles.

The above is the material of the baby bottle, which is also the most important in the selection of baby bottles in daily life. The main ones sold on the market are glass bottles and plastic bottles, which are easy to clean and disinfect, but not easy to break when alternating solutions. The baby bottles will turn yellow and transparent after long use, so you must remember to choose them carefully in daily life.