How to use heel stickers?

People often experience heel pain, especially those who often do physical work or need to stand for a long time. The heels will bear a great load, and then pain will occur. In addition, middle-aged and elderly people will also experience heel pain when the temperature drops. For this problem, the easiest way is to use heel patches. The following introduces the correct way to use heel patches.

How to use heel stickers?

1. Wash or wipe the heel of the shoe and let it dry, leaving no dust, stains, oil stains, or sweat stains;

2. It is recommended to place the shoes that need to be pasted with heel stickers in a cool and ventilated place for 2-3 days, and then stick the heel stickers on the shoes after the parts that need to be pasted are dry;

3. Tear off the sticky film of the insole, put the sticky side facing backwards, and stick it to the appropriate part of the heel of the shoe; be careful that the heel sticker cannot exceed the edge of the heel of the shoe;

4. When pasting, be careful not to let the sticky material of the heel sticker get dirty with dust or other dirt on your hands, so as to avoid weakening the stickiness;

5. Stick it from one end and press it a little bit. Leave the shoes for a day and use them the next day. They will not fall off. Also, please note that suede and cloth shoes cannot be used.

6. After wearing, please put the shoes in a ventilated place to dry to keep the inside of the shoes dry;

First, clean the heel area inside the shoe. Make sure it is dust-free and dry without water or moisture, otherwise it will affect the life of the heel post.

Let's take a look at the heel stickers you bought. Please note that there is a front and a back side. Generally, the heel stickers are very skin-friendly. Tear off the protective paper on the back of the heel stickers, and you will see the glue side. After wiping the shoes to be pasted with the heel stickers with a wet towel, slowly bend the glued part along the curvature of the heel of the shoe, and then gently stick it along the edge.

After sticking it on, press gently with your hands to allow the glue to stick. The purpose of pressing is to allow the glue to fully exert its usefulness so that it will not fall off after repeated friction when walking.

Pay attention to the position of the sticker. The heel sticker should not exceed the heel edge of the shoe itself, but should be lower than the back of the shoe. Otherwise, it will easily fall off and your feet will feel very uncomfortable.