Raw materials for dishwashing liquid_Raw materials for dishwashing liquid

Detergent is a substance that we need to come into contact with frequently in our lives, especially when we wash dishes after meals. There may be a lot of grease in the dishes, which makes it inconvenient to wash. At this time, using some detergent can effectively remove some stains. As long as you rinse it with clean water a few more times, you will not smell the smell of detergent. So what are the raw materials of detergent?

Latest formula of dishwashing liquid

1. Alkaline formula: super detergent masterbatch + super saponified emulsifier + drawing powder + flavor + preservative + salt + water

2. Neutral formula: super detergent masterbatch + super nano emulsifier + drawing powder + flavor + preservative + salt + water

*Super detergent masterbatch has six major differences compared to conventional detergent raw materials:

1. It combines super oil removal, high foaming, high viscosity and transparency. It is a pure active ingredient with no ineffective cost ingredients.

2. The biggest advantage is its super strong ability to remove edible oil. It contains a large amount of super emulsifier which is unmatched by other raw materials.

3. It can remove industrial oil, mineral oil and inorganic oil which cannot be removed by conventional detergents.

4. Compared with all formulas, it has the highest cost performance for the same cost.

5. The thickening effect is very good, and it can produce dishwashing liquid at a very low cost of 0.2 yuan per pound.

6. Able to resist the influence of metal ions on active substances.

1. Special features

1. Super edible oil removal ability, it has super emulsification and cleaning ability for various edible oils such as peanut oil, rapeseed oil, salad oil, corn oil, butter, mutton oil, lard, tea seed oil, palm oil, vegetable oil, mixed oil, etc.

2. It has strong decontamination ability and has super strong emulsification, dispersion, disintegration and separation ability for dirt, sludge, stains and stains.

3. It has strong emulsifying ability, and has strong emulsifying ability for mixed compound oils such as industrial oil, mineral oil, inorganic oil, organic oil, edible oil, animal oil, and vegetable oil.

4. It has good thickening ability and can be thickened with salt without adding other thickeners.

5. Very good foaming ability, instant foaming, secondary foaming and foam increasing and stabilizing effects are all very good.

6. Super detergent masterbatch is composed of active ingredients and does not contain any cost-effective ingredients.

7. Very transparent, neutral, resistant to hard water, and resistant to the influence of metal ions on active substances.

8. Super saponified emulsifier has better oil removal ability than super nano emulsifier, and super nano emulsifier has higher foaming ability than super saponified emulsifier.

9. For conventional low-cost products below 0.5 yuan per pound, it is recommended to use an alkaline formula, and for medium and high-cost products, it is recommended to use a neutral formula.

3. Production Process

1. Production process: Add super dishwashing liquid masterbatch, super saponified emulsifier (super nano-emulsifier), drawing powder, flavor, and preservative into water, stir with a blender to dissolve, then add salt to thicken.

2. How to adjust the salt ratio

1) Initially determine the salt ratio: first make a small test with one kilogram of product. The method is: use your fingers (don't use a spoon) to pinch a little bit of salt, add it little by little, stir once to dissolve, and then add it a second time. When the consistency is achieved, if adding salt three times in a row fails to improve the consistency, it means that the salt ratio is sufficient. The salt used must first be measured to determine the proportion of salt used per kilogram of product, and then scaled up to the proportion required for production.

2) Determine the salt ratio: There will be a certain measurement error when scaling up the salt ratio from one kilogram of product to the ratio required for production, and it needs to be adjusted again. The adjustment method is: take out one kilogram of the washing solution produced, adjust the salt ratio to the thickest state, and you will know the final salt ratio.

3) Adjust the salt ratio: change the salt type (edible salt, industrial salt, brine, coarse salt), change the water weight, adjust the formula, adjust the cost, adjust the raw materials. If any of these situations occur, the salt ratio must be readjusted. Note: Too much salt will turn into water and the aqueous solution will turn white.

4) When a novice conducts an experiment, first make a small test with one kilogram of product. After all the raw materials are dissolved, divide them into ten portions to adjust the salt and find the method first.